How To

Welcome to the How-To section! On this page we have a few videos that will help you measure and install your stair tread. If you have any questions, please Contact Us!

Instructions For Measuring Bolt-On Stair Tread:

How To Measure Concrete Bolt-On Stair Tread Video:

Print this measuring and quote form and take it to the stair tread you want to measure. Fill in the measurements for lines A through F.

• A: Measure from Center of Bolt on Left to Center of Bolt on Right - ________
• B: Measure from Center of Bolt on Front Right Side to Center of Bolt on Back Right Side - ________ (typical is 6” or 6 ¼”)
• C: From the Top of the Tread, Measure the Width - ________ (typical is 11” or 12”)
• D: From the Top of the Tread, Measure the Length - ________
• E: Measure the Thickness of the Tread - ________ (Typical is 2 ¼” or 3”)
• F: Measure from the Inside of the Metal Stringer on the Right Side to the Inside of the Metal String on the Left Side - ________

Now that you have your measurements, fill out and submit the form online. If you prefer you can simply fax the form you just completed to 936-890-5501, or call to talk with one of our knowledgeable staff at 1-877-708-7323.

---

Instructions For Removing and Installing New Bolt-On Treads:

How To Install Concrete Bolt-On Stair Tread Video:

Tools Needed:

• 9/16 Wrench

Steps:

• Remove all four 3/8th nuts underneath your damaged tread with a 9/16th wrench.
• Lift damaged tread straight up, making sure the bolts clear the angle tabs on each side.
• Dispose of damaged tread.
• Lift the new tread into place aligning the bolts with the holes in the angle tabs.
• Secure all four 3/8th nuts onto the bolts underneath each tread
• Tighten nuts, but don't over tighten!